TEL-14

Technical Specifications

Frequency Response: 300 Hz - 3.4 kHz
Send Gain Control Range: +/-12 dB
Receive Gain Control Range: +/-12 dB
Ring Detect Sensitivity: Operates with most international telephone ring signal standards.
Auto-Mode Levels: -12 dBv on intercom line for -9 dBm on telephone line; -27 dBm on telephone line for -12 dBv on intercom line.

TELEPHONE DISCONNECT
Dial Tone: 350 Hz + 440 Hz, continuous
Busy Tone: 480 Hz + 620 Hz, 0.5 sec on / 0.5 sec off
Reorder Tone: 480 Hz + 620 Hz, 0.25 sec on / 0.25 sec off
Loop Current Interruption: >5 ms
DC Isolation: >10M Ohms between each telephone line and the IMF interface frame.

POWER REQUIREMENTS
Supplied by the PSU-101 power supply
Voltage Required: Between +/-8 and +/-12 Volts
DC unregulated
Current Required: +370 mA /-130 mA

CONNECTORS (VIA IMF FRAME)
To Matrix Frame: (2) RJ-45
DB-9M Connector: CONTROLS & INDICATORS (2 EACH)
Hook switch and LED; Send Volume control and LED; Receive Volume control; Auto Gain switch and LED; Auto Answer switch and LED; Auto Nulling reset switch.

SIZE & WEIGHT
Size: 5.0625"H x 1.375"W x 9.16"D (129 x 35 x 233 mm)
Weight: 0.78 lbs (0.32 Kg)

Product Spares List

Spare Part	Part Description
710755	Latest version of the TEL-14/TEL-14H controller daughter card.  Updates an older TEL-14 to operate with new Eclipse systems.
250834	Replacement  Vertical Front Panel Plate
710538	Replacement Rear Interface Card
240058	Replacement  Trim pot Shaft (Side Tone, Send Rcv) (x4) Black
240056	Replacement  Module Handle
240021	Replacement   Hook Black Button (x2)