Eclipse-PiCo

ECLIPSE PICO TECHNICAL SPECIFICATION

0 dBu is referenced to 0.775 volts RMS

General
Height: 44 mm or 1.75 inches (1 RU)
Width: 482 mm (19 inches)
Depth: 300 mm (12 inches)
Weight: 5 kg max.
Power Consumption: 40 W Max. per inlet
Number of Panel Compatible Ports: 32
Number of Analog Audio Ports: 4
Number of Expansion Modules: 1
Number of Power Supply Units: 2
Maximum Number of Ports Per System:  Can intelligently link 2 Eclipse PiCo matrices

Matrix Performance
Sample Rate: 48 kHz
Resolution: 24 bit
Frequency Response: @ 48 kHz sampling30 Hz – 22 kHz ± 3 dBu
Crosstalk (adjacent channel): <–70 dBu
Nominal Level: 0 dBu
Matrix headroom: 18 dBu
Distortion: <0.05 %, @ 0 dBu, 300 Hz to 10 kHz; <0.1 %, @ 0 dBu, 100 Hz to 20 kHz
Off Noise: <–98 dBu relative to +18 dBu, 20 Hz - 22kHz
On Noise: <–83 dB relative to +18 dBu, 20 Hz - 22kHz
Key Response, Intra-System: <40 ms for audio route
Linked Systems: <60 ms for audio between matrices
Temperature: 0 to +40 C, ambient; -55 to +70 C, storage
Humidity, Maximum: 90% non-condensing

Matrix Interfaces
GPI inputs: 8 total; opto-isolated
GPI outputs (relays): 8 total; isolated relay contacts
GPI connector: 25-pin D-type socket on rear panel
GPO connector: 25-pin D-type plug on rear panel

External GPI-6/RLY-6: RJ-45 on rear panel
Network: 10/100 Base-T Ethernet ; maximum distance: 100 meters; connector RJ-45

Serial PC RS-232

Baud rate: 57600
Maximum distance: 10 meters

Number of ports: 1
Connector: 3.5 mm socket on front

System Programming
Crosspoint Level Control: 0.355 dB steps
Input Level Control: 0.355 dB steps
Output Level Control: 0.355 dB steps
VOX Input Detection Threshold: 0 dB to – 40 dB adjustable

Minimum PC Requirements
Processor: Pentium III 600 MHz
Memory: 512 MB RAM
Hard Disk: 500 MB
Input Devices: CD-ROM Drive
Display Resolution: SVGA
User Entry Keyboard, Mouse
Ports: 2 serial ports and/or network IEEE 802.3

Ethernet card
Network: IEEE 802.3 Ethernet Card
Operating Systems: Windows 2000 SP4/XP Professional
SP2/2003 Server: SP1


Product Spares List

Spare Part Code	Spare Description
-SOFTWARE-UG-PICO	Upgrade Eclipse-PiCo system software.  Please supply Sales with all supporting information to enable the correct sets of EPROMs and CD-ROMs to be dispatched.  If in doubt please contact your distributor or Technical Support Centre.
400101Z	Spare Eclipse PiCo PSU Module