Clear-Com Encore™
Interfaces
|
|
Click here to view product datasheets
|
|
|
TW-47 2-way radio/walkie-talkie interface
Compatible with both Clear-Com and RTS®, TW-47 connects virtually any set of walkie-talkies to anyone on the wired party-line intercom; simply use one walkie-talkie as a basestation. The base-station radio is keyed from the intercom call signal. Extensive RF and EMI isolation prevents interference from entering the intercom system. Separate transmit and receive level controls are provided, along with audio level and transmitter keying indicators. The stand-alone interface is powered by the intercom line.
(Enhancement of TW-40)
|
|
|
|
|
EF-701M Interface
The EF-701M interface converts a single channel of standard or TW party-line intercom to four-wire audio, while also converting call signals to RS-422 data (and back). The resulting four-wire audio plus RS-422 data can then be sent to a Clear-Com Matrix port, fiber-optic converter (modem) or connected to another EF-701M over twisted-pair cable such as CAT-5E.
(Enhancement of EF-1M)
|
|
|
|
|
TWC-701/TWC-704
The TWC-701 2-channel cable adapter combines two intercom channels on to a single 3-pin XLR cable. All two-wire (TW) beltpack models require this adapter to support a two channel connection to a multi-channel Clear-Com system.
(Enhancement of TWC-10)
The TWC-704 provides four TWC circuits in 1RU. Each TWC-701 and TWC-704 module can drive up to fifteen RS-603 series beltpacks.
(Enhancement of TWC-104)
|
|
|
|
|
TW-12C System Interface
TW-12C connects one intercom system to another. Optoisolation eliminates hums and buzzes. Compensates for level and impedance differences between systems. Allows Clear-Com-to-Clear-Com, Clear-Com-to-RTS, and RTS-to-RTS system configurations. Powered by the connected intercom system. Translates “call” signals in both directions.
(Enhancement of TW-12B)
|
|
|
|
|
IF4W4 4-wire interface
Four channel interface connects Clear-Com to TV cameras, two-way radios, satellite links, and other communications devices through either their headset jacks or 4-wire circuits. IF4W4 has selective party-line capability. Features individual transmit, receive, and null controls, as well as transmit level indicators. Switchable mic or line-level output for compatibility. The builtin test jack and test tone provide quick nulling.
(Enhancement of IF-4B4)
|
|
|
|
|
AC-701 Telephone and 2-wire interface
Transformer-isolated unit connects a Clear-Com system to any other 2-, 3-, or 4-wire system or to telephone lines. Ideal for connecting telephone lines to Clear-Com. Built-in test tones and balancing controls for fast, easy setup. Individual transmit and receive gain controls.
(Enhancement of AC-10H)
|
|
|
|
|
FIM-202D
The FIM-202D is an optical fiber interface for use with Eclipse Digital Matrix and Matrix Plus3 intercom systems. Each pair of FIM-202D fiber interfaces allow one or two digital matrix intercom panels or interface modules to be remotely connected to the matrix card frame via optical fibre.
|
|
|
|
