Clear-Com Encore™

Accessories

Microphone Compatibility Chart
AMS-1027
Bi-amplified monitor speaker in 1RU. Magnetically shielded speakers. Exceptional audio quality with low distortion at high output power. Baffled speaker will reach output levels of 96 dB SPL without audible distortion. Extended bass response; Separate volume and balance; user configurable to A/B volume controls for each cahnnel. Balanced or unbalanced line-level XLR inputs; RCA-type inputs; XLR loop-through; front panel headphone jacks; built-in-limiter; two adjustable LED bar-type VU meter displays.

(Enhancement of AMS-1025)
FL-7 - Call Signal Flasher
Provides a visual and/or audible indication of a "call" when connected to a Clear-Com or compatible intercom system.

(Enhancement of FL-1)
GM-9 / GM-18 - 9" or 18" gooseneck microphone
Used with a variety of Clear-Com party-line and digital matrix intercom stations. Uni-directional electret condenser microphone mounted on a 9-inch or 18-inch flexible gooseneck. Gold-plated, threaded, locking 3-conductor quarter-inch connector for secure connection to the station.


GN-250 / GN-450 - Gooseneck microphone
GN-250 - 25cm/10" Plug-in gooseneck microphone
(for I-Stations only)

GN-450 - 45 cm/18" plug-in gooseneck microphone
(for I-Stations only)


SP-3
A one-female-input to three-male-output cable assemby for intercom line splitting.


WP-2 - Intercom Outlet Wall Plate
Selectable two-channel wall plate connects to single-channel beltpacks such as the RS-601. 3-pin male XLR connector with two-position channel-selector switch, allowing user to talk on either of two intercom channels. Mounts in standard single-gang electrical box.


WP-6 - Intercom Outlet Wall Plate
Wall plate for use with two-channel beltpacks such as the RS-602 and RS-622. 6-pin male XLR connector connects user with two intercom channels. Mounts in standard single-gang electrical box.


YC-36 - "Y" Adapter
Plus into the 6-pin male XLR intercom connector on a RS-602 or RS-622 beltpack. The other end provides two 3-pin female XLR connectors, for separate line connection to channels A and B.


YC-66 - 6-Pin Line Splitter
One 6-pin male XLR connector splits into two 6-pin female connectors.


MT-1 - Isolator Circuit Card for Party-line Intercom Systems
Electrically isolates the ground, power, and signaling when connecting between two party-line intercom systems. Use one card per channel of intercom.






© 2007-2008 Vitec Group Communications, All rights reserved.
® Clear-Com, A Vitec Group brand. The Vitec Group plc		 Contact Clear-Com      Feedback