Installing the Eclipse HX-Delta

The following overview gives a summary of the steps required to install an Eclipse HX-Delta matrix. More detailed information on each step is provided in the sections that follow.

To install an Eclipse HX-Delta:

• Remove the Eclipse HX-Delta matrix chassis from its shipping carton.

• Install the Eclipse HX-Delta to the standard 19-inch rack.

• Environmental note: Leave clearance on all sides of the matrix chassis to ensure proper airflow. Do not block ventilation vents.

• Check the position of CPU cards and interface cards, power supplies, and rear connector panels. Later sections in this guide give more information on these items.

• Apply power to the unit using the two external power supplies.