Adding an E-IPA-HX Card to the Software

To add and E-IPA-HX card to the software:

  1. In the EHX configuration software go to: Hardware > Cards and Ports, and then navigate to an available slot number (marked Empty). Do either of the following:
    1. Double click the slot.
    2. Right click the slot and select Set Card Type.
  2. Select a card type from the drop-down menu listing the available card types.
Note: You should not have both E-IPA-HX cards and E-QUE-HX cards on the same matrix. This restriction is to prevent users installing and using E-QUE-HX FreeSpeak 1.9 transceivers and E-IPA-HX FreeSpeak 1.9 transceivers on the same matrix.