Adding an E-IPA-HX card to the software

To add and E-IPA-HX card to the software:

1. In the EHX configuration software go to: Hardware > Cards and Ports, and then navigate to an available slot number (marked Empty). Do either of the following:
   1. Double click the slot.
   2. Right click the slot and select Set Card Type.
2. Select a card type from the drop-down menu listing the available card types.

FreeSpeak beltpack roaming is not supported between different matrix cards (E-IPA and E-Que) or transceiver types (E1 and IP).