Four-Wire and Control Connection to Radio System

To connect the HelixNet Partyline to a radio system using four-wire:

1. In the Modules Settings menu, select Slot n/Port A/B 4W > Channel Assign > Channel # to assign the 4W port to a Channel, for example Channel A.

2. In the Modules Settings menu, select Slot n/Port A/B 4W > Action Trigger > Disable to set Action Trigger to Disable for that 4W port.

3. In the Channels menu, select Channel # > GPO on Talk > Relay # to select a Relay.

4. Connect the 4W audio and the configured Relay to the radio base station.