HBP-2X and HXII-BP Beltpack Menu Map

Menu 1 (First) >

Menu 2 >

Menu 3 (Last)

Roles

Select Role or Local Config

Audio Settings

Sidetone Gain

Range: 0dB to -30dB, OFF

Default: -12dB

Headphone Limit

Off + Range: +6 to -12dB

Default: 0dB

Headphone Gain

0 - 12dB (increments of 3 dB)

Default : 0dB

Sidetone Control

Tracking
Non-tracking
Disabled

Default: Tracking

HS Mic Type

Default: Dynamic (0dB)

Headroom (only for HBP-2X)

Normal
High

Default: Normal

Contour Filter

Enabled
Disabled

Default: Disabled

Beltpack Settings

Left Keyset

Right Keyset: the same as Left Keyset


Channel assign (1 – 24)

Talk (latch/non latch/disabled)

Default: Latch

Secondary Talk Action (unassigned/call/control event 1/control event 2)

USB flasher (disabled/blinking/solid)

Default: disabled

  Vibrate on Call

On/Off

Default: Off

  

Display Settings

OLED Brightness

High
Medium
Low

Default: Medium

Key Brightness

High / Low
High / Off
Low / Off
Off / Off

Default: High / Low

Rotate Display

Enabled
Disabled

Default: Disabled

Screensaver

Channel

Hostname

Role (default)

Blank

Disabled

Network (HXII-BP-X4 powered over Ethernet only)

Pair to Station

By Name
By Address

       

Administration

Software Version

npl-1.0.x, uboot

Software Update

npl-1.0.x

Reset to Default

 

Reset Now

Diagnostics

Hardware

Important Note:
There are 4 levels of Menu for Hardware

Main PCB

Part: [Part_Number]
Revision: [Revision]
Serial number: [Serial number]

 

Powerline

Note:
Line (Partyline) that connects beltpack to the network (and which also powers the beltpack).

Status: [OK or BUSY (according to responses to MME requests)].
DMC:[MAC of powerline modem]
HMC: [MAC of local blackfin processor]
MMC: [MAC of the Main Station powerline modem, to which the beltpack is connected]
Rx rate: Range: 140 – 150 Mbps
Tx rate: Range: 140 – 150 Mbps

Volts:

 

Networking (HBP-2X and HXII-BP-X4 over Ethernet and Powerline)

Ethernet

 

Connection Type: Ethernet or Powerline

IP address

 

DHCP (Ethernet only)

  

IP address

  

Gateway

  

Subnet mask

  
Mac address  
IVP Router (Ethernet only)

Keysets 1 & 2

Name: Channel name
Talkers: Number of talkers on Partyline
Beltpacks: Number of beltpacks listening on Partyline
 Main Stations: Number of Main Stations listening
2-Wire: Number of 2-Wire ports listening
4-Wire: Number of 4-Wire ports listening