Connecting the HXII-BP Beltpack over Powerline to the Main Station

To connect the HXII-BP Beltpack to the Main Station:

  1. There are two powerline connections on the Main Station which can each support up to 10 digital HXII-BP Beltpacks. There are two connectors (3-pin XLR, male and female) for each line.

    Connect the cable to the selected connector on the Main Station.

Note: For the location of Lines 1 and 2 (the powerlines) on the Main Station, see  F, G in diagram in HMS-4X Main Station: rear panel.

  1. Connect the cable to the beltpack, using the 3-pin XLR connector on the bottom of the beltpack.

For examples of topologies, see Topologies