Powering the HXII-BP using PoE

To connect the HXII-BP to the Main Station for PoE:

  1. Connect the Main Station to a network switch using the HLI-ET2 Ethernet interface module.

  1. Connect the HXII-BP Beltpack to the PoE switch on the same network as the Main Station.

    Note: The beltpack must be paired to the Main Station.

Important: When using an IEEE-802.3af compliant PoE switch, be sure to note the switch's power budget. Each HXII-BP requires 4 Watts of power. Do not exceed the power budget of the switch when attaching HXII-BP beltpacks.