Connecting the Remote Station to a Main Station using LAN
To connect the Remote Station to a Main Station:
-
Ensure that the Remote Station is physically connected to the Main Station.
-
In Menu mode, select Networking, and then Pair to Station.
-
From the third menu, select the Station ID to connect to.
To set the preferences:
-
In Menu mode, select Networking, and then Preferences.
From the third menu, select DHCP.
-
Select one of the following:
-
Enabled (default)
-
Disabled
-
-
From the third menu, select IP Address, and enter the correct IP address.
-
From the third menu, select Gateway, and enter the correct gateway address.
-
From the third menu, select Subnet Mask, and enter the correct subnet mask.