Editing the Program Input

  1. From the top left of the Roles screen, select Main Station (HMS).

  1. From the drop-down list of roles, select the role you wish to edit.

  2. Select Program Input.

You can configure the following:

Setting

Options

Label

Use to give the program input a meaningful name

Gain

Adjust slider control from -12dB to 12dB (Default 0dB)

VOX

Disabled (Default)/Enabled

VOX Off Delay

0.5s (Default) – 4 s

IFB Dim Level

IFB Disabled

-6 dB

-12 dB

-18 dB

-24 dB

Full Cut

Channel Assignment

Select a Channel from the list of Channels.

Action trigger

Enabled/Disabled (Default)

  1. For each setting, select the option you require.

Note: When assigning a program input to a Channel in the CCM, the system assumes that program input is associated with a device. This will be reflected in the Assignments page in the CCM, where a program input is assigned to a Channel, the device hostname rather and the Role name will be visible in Roles view
Note: When controlling an IFB dim level on a Program Input you must edit the Role for the device the Program Input comes in on. For instance, if the Program Input is attached to the Main Station, you will edit the Role for that Main Station and this will control the dim level on Remotes, Speaker Stations and beltpacks connected to the Main Station