Using the Channel Keysets

A keyset (set of controls) is located next to each of the four display screens. In operating mode, each keyset is dedicated to the control of one of the four assigned intercom Channels. For details of the standard on screen information for each Channel, see table in Main Station/Remote Channel keyset and display.

Note:	To change (edit) the Channel label (name), see Editing the Channel label.
	The display screens enters screensaver mode (if enabled) if the Main/Remote Station remains inactive for 10 minutes. Press any key to leave screensaver mode.

To send a call signal to all the connected devices on that Channel, press the Call key.

To talk to the all the devices on that Channel:

1. Press the Talk key. When the gooseneck or headset mic is live, the Mic On key is activated automatically.

2. Speak into the headset or gooseneck mic (see also (link…)

To adjust the volume of incoming audio per channel, turn the rotary control. Turn the rotary control clockwise to increase the volume, and counter-clockwise to decrease volume. The current volume level is shown on screen.

To mute incoming audio per channel, press the rotary control. The display screen displays the muted volume bar.

To unmute incoming audio (restoring the audio to its previous volume level), press the rotary control again.

Note:

In Menu mode, the rotary control for each Channel keyset is used to scroll and select menu items. For more information, see Editing the Channel label.