Using the speaker station with push-to-talk (PTT) actions

The Speaker Station is available in a special configuration with a 7-pin XLR headset connector. This is used with two assignable GPI/Push-to-talk (PTT) controls that enable you to configure various buttons press actions from a switch wired to the GPI/PTT.

More than one button press can be configured on each GPI/PTT. There are three configurable actions available: PPT1, PPT2 and PTT 1 & 2 (both buttons pushed at the same time).

The four local talk and call keys, the headset (Hset) key and the microphone (MIc) key can be assigned to any GPI/PTT.

The GPI/PTTs can be configured from the CCM or from the front panel menu system.

For CCM configuration see Editing the Logic Input Options

Please contact your Clear-Com representative for further information about availability of the Speaker Station.