How to Remove a Device from a Link-Group
- Access the browser-based CCM for any device within the Link-Group.
- In the Overview page, click on the device image of the unit that you want to remove from the group.
- Navigate to Linking for that device.
- Click Change Role to Link-Master.
- Apply Changes.
The device will be reconfigured as a Link-Master and removed from the group.
Close
Remove an off-line Link-Member from a group
- Access the Core Configuration Manager for any device within the Link-Group.
- In the Overview page, the off-line unit will show a red ‘X’. Click on this device.
- You will be asked if you want to remove this unreachable device. Click Delete.
The device will be removed from the Link-Group.
If this same device is powered on again, it will automatically seek the same Link-Master and ID slot. If the ID has been taken by another device, it will take the next available ID. If no ID is available (because there are already 6 devices in the group) it will not be able to join the group.
To re-use this device with a new Link-Master, it must be returned to the default role (Link-Master) and then re-linked. See Creating a Link-Group.
Close
Remove an on-line Link-Member from a group