Navigating the menu system

To enter menu mode, press the menu button on the front panel to display the top level menu.

The menu LED will light and various menu options are displayed on the key displays.

Access to the System Configuration, Local Preferences and Diagnostic menus is set from EHX. Depending on the configuration, access to some or all of these menus may be disabled on the panel.

To navigate each menu level:

• On lever key or pushbutton panels, use the lever keys or pushbuttons associated with a particular menu option to select that option.

Note: Press lever keys down (Talk) to select menu options. The up (Listen) direction is not active except in the case of the View Keys and Local Keys menus, where you can use both up and down (Talk and Listen) key presses to select menu options.

• On rotary panels, use the talk button associated with the displayed menu option to select that option.

The selected menu options are then displayed on the panel and the process is repeated until you reach the setting you want to enable, disable or adjust.

To return to the previous menu use the Reply key talk button (which displays the name of the current menu).

To scroll through label lists:

• On lever key and pushbutton panels, use the up/down volume control buttons.

• On rotary panels, use the rotary control.

You can access the following menus directly using the dial pad on the 2RU panels:

• 1 - Dial menu

• 2 - Local Exclusive

• 3 - Local page override

• 4 - Assignment Panel menu

• 5 - Local Key Assign menu

• 7 - Local Preferences menu

• # - Fast Key Assign

For more information, see Dial pad (2RU panels).