Shift Page

By momentarily pressing and releasing the Shift Page button, you can toggle between the main page and the currently selected shift page.

When you press and hold the Shift Page button for more than 500ms, the panel is placed in Shift Page mode. The Shift Page menu is shown on the display and the red indicator LED is lit.

From the EHX Software, you can also enable the shift button to cycle through consecutive shift pages.

The software now supports named shift pages. This allows the user to give any shift page a 1 - 10 character name to better identify the use of the page. See EHX user guide for information on the naming of shift pages.

From the EHX Software, you can select two shift page options:

  • Selectable Shift Page
  • Cyclic Shift Pages

To find these options in the EHX Software, navigate to:

Configuration > Preferences > Panel & Key Operation

The V-Series Specific Settings area is located at the bottom of the Panel & Key Operation window.

When using supervisor mode, the supervising panel will show the local shift page names when in the Shift menu.

If you latch any key on a shift page, it remains latched if you select a different shift page.

Shift Page Mode: when the Shift Page Menu is open, the keys on the panel will be color coded.

  • Bright green: Shift Page currently selected
  • Dim green: keys are configured on the Shift Page