Settings for the Program Input

 

To enable or disable the remote station program input to the rest of the HelixNet system:

  1. In Menu mode, select Audio Settings and then Program Input.

  2. From the third menu, select Mode.

  3. From the fourth menu, select either:

    • Enable

    • Disable

  4. Press the rotary controller to confirm your selection.

To configure the label for the Program Input:

  1. In Menu mode, select Audio Settings and then Program Input.

  1. From the third menu, select Label.

  2. From the fourth menu, select the existing label by scrolling to it and pushing the rotary controller. Edit the label by rotating the controller to scroll through letters and digits and pushing to select a letter/digit.

  3. When you have done, scroll to Save and push the rotary controller. To exit without saving changes, go back to the third screen.

To configure the audio level for the Program Input:

  1. In Menu mode, select Audio Settings and then Program Input.

  1. From the third menu, select Gain.

  2. From the fourth menu, select one of the following:

  • + 12dB

  • +  6dB

  •     0dB (default)

  •   - 6dB

  • - 12dB

  1. To confirm the selected setting, press the rotary control.

To enable or disable

To configure the action trigger delay:

  1. The action trigger activates a relay when receiving a call or activating a talk on a Partyline Channel. You can enable or disable the action trigger. To configure the audio setting for the action trigger:

    1. In Menu mode, select Audio Settings and then Program Input.

    1. From the third menu, select Action Trigger.

    2. From the fourth menu, select one of the following:

    • Enabled (default)

    • Disabled

    1. To confirm the selected setting, press the rotary control.

 

A VOX switch (audio gate) will only transmit audio when audio is above a certain threshold. This is in order to stop the channel transmitting background noise, thus wasting network bandwidth resources. You will enable or disable (default) the VOX according to the noise in your background environment.

When VOX is disabled, associated settings are hidden.

To select the VOX:

  1. From the third menu, select VOX.

  1. From the fourth menu, select one of the following:

  • Enabled

  • Disabled (default)

  1. To confirm the selected setting, press the rotary control

To select the VOX Off Delay:

  1. From the third menu, select VOX Off Delay.

  1. From the fourth menus, select one of the following:

  • .5 sec (default)

  • 1 sec

  • 2 sec

  • 3 sec

  • 4 sec

  1. To confirm the selected setting, press the rotary control.