Assigning a GPO relay to a Channel
You can assign a relay that is triggered on receiving a call or detecting a talk on a Partyline Channel. To assign (or unassign) a relay:
-
In Menu mode, select Channels and then the name of the Channel.
-
From the third menu, select GPO on Talk or GPO on Call.
-
From the fourth menu, select either None, or choose from the list of available relays.
Note: The default is None.
-
To confirm the selected setting, press the rotary control.
Note: | An Action Trigger initiated by a Program Audio Input VOX can on only be assigned to a GPO on the same device. |