Using the gooseneck mic, loudspeaker and headset

To use a gooseneck mic to talk to connected intercom users, devices (including beltpacks) and systems:

  1. Connect the gooseneck mic, using the gooseneck mic connector (3-pin female Tuchel connector) on the left of the front panel.

Note: For the location of the gooseneck mic connector, see Speaker Station.

  1. To talk to other intercom users and devices:

    1. Press the Talk Key.

When the mic (gooseneck or headset) is live, the Mic key is activated automatically.

  1. Speak into the microphone.

Use the front panel loudspeaker to listen to connected intercom users, devices and the Program Feed.

To adjust the volume level:

  1. Adjust the volume of all incoming audio by turning the loudspeaker rotary control [Main], located in the center of the panel.

To increase the volume level, turn the rotary control(s) clockwise. To decrease the volume level, turn the rotary control(s) counter-clockwise.

Note: When you connect a headset, incoming audio is routed to the headset instead of the loudspeaker.

Note: You can mute the speaker by pressing the rotary control.

As you increase or decrease the volume, the level control LED passes through a range of indicator colors.

LED color

Volume level

Green

Low

Amber/Green

Low/Medium

Amber

Medium

Red/Amber

Medium/High

Red

High

To use a headset to talk and listen to connected intercom users, devices and systems:

  1. Connect the headset, using the headset connector (4-pin XLR–M) on the far left of the front panel.

The Headset key is automatically activated. Incoming audio is routed to the headset instead of the loudspeaker.

Note: For the location of the headset connector and the headset key, see Speaker Station.

To configure audio settings for the headset, see Configuring the Audio settings.

  1. To talk to other intercom users and devices:

    1. Press the appropriate Talk key.

When the microphone (gooseneck or headset) is live, the Mic key is activated automatically.

  1. Speak into the microphone.

  1. To adjust the volume level of incoming audio to the headset:

    1. Adjust the volume of all incoming audio by turning the loudspeaker rotary control [Main]. The control is located to the left of the loudspeaker.

    1. Adjust the volume of the Program Feed using the PGM Trim Pot.