Resources

Click the Resources tab to see the resources page. This gives an overview of the hardware and ports that are present. From this page, you can use the Add Resource button to:

• View a list of both discovered and registered IP transceivers
• Add/remove any discovered IP transceivers to/from the system
• Register beltpacks to the system
• View a list of both discovered and paired HelixNet devices
• Add/remove any discovered HelixNet devices to/from the system
• View a list of V-Series keypanels with connection status
• Add/remove keypanels and enable/disable ports
• View a list of configured I.V. ports, with connection status
• Add/remove I.V. ports and enable/disable ports
• Create Dante ports

• Adjust settings on interface ports: 2-wire and 4-wire
• Allocate Licensed Ports for use with different connection types: Any, Dante, Wireless, I.V. Ports, HelixNet. This allows you to keep track of how you are using the licensed port capacity that you have, and avoid being unable to connect due to lack of available port capacity.