Monitoring the Logic Page (Status)
This page shows the GPIs and GPOs (relay) that you have set up in the Configuration > Logic page. You can see if these are currently active in the system under the Status column.

A green icon indicates a currently active input or relay.
The buttons under the FORCE column are toggle buttons that can be used to test the working of the GPIOs or to turn them permanently off or on. These override the operation of the configured GPIOs.

In this example, GPI 1 and GPO 2 are forced ON for testing purposes. GPO 2 is permanently OFF (for example, if you want to ensure that a signal light never comes on at this time).
Close