Using a Transceiver With a Fiber Connection

To connect a Base Station to a splitter (FSII-SPL) using Fiber, you must install Fiber modules to the Base Station and the splitter.

  • Modules are available for single mode Fiber cable (SFP-SMFO-100M-LX or HLI-SMFO) and multi-mode Fiber cable (SFP-MMFO-100M-FX or HLI-MMFO).
  • Modules must be ordered from Clear-Com as a pair, one for the Base Station and one for the splitter.
  • Modules can be hot patched. There is no need to power off devices.
  • To install the modules, simply remove the dust cap from the connector port and slide the module into the connector.
Note:When using a Fiber connection, all devices must have local power supplied.