Human Interface

LEMO 12-pin connector compatible with plug FGG3B.312. CLAD10 used for dynamic headset, PTT & GPIO operation

Aux PTT Connector

4-pin Lemo socket of type 1B used for Aux PTT
Two 3.5mm jacks used for electret headset in conjunction with AUX PTT

Aux Mic Inputs

Two 3.5mm jacks facilitating two line-level stereo inputs

Video Output

HDMI Type A connector (v1.4a of
the EIA/CEA-861 standard)

Networking

Power-over-Ethernet (PoE) enabled RJ45 Fast Ethernet port and pluggable SFP supporting an optional Gigabit Ethernet 1000Base-SX multimode or single mode transceiver

USB

3 USB type A ports (two 2.0 & one 3.0) used for connection of a mouse, keyboard or external storage device. The USB port on the rear labeled “USB #3” is the USB 3.0 port. The front USB port is currently not enabled for use.

Tone Generation

Up to 4 tones can be injected into any audio mix

Power

2.5mm DC JACK socket with screw lock retention with wall wart capable of supplying PoE or +12V DC ±0.5V DC, 1A with momentary pushbutton switch to cycle power

Status LEDs

4 LEDs providing status of DC power, network link, application and overall system

Mounting Options

Vertical desktop mounting base or an under desktop mounting bracket kit
Sidetone -39dB to -15dB

Environmental

Operating Temperature: 32° to +104° F (0° to +40° C)
Storage Temperature: -4° to +140° F (-20° to +60° C)
Storage Altitude: 10,000 meters in an un-pressurized environment
Humidity: 20% – 90% (non-condensing when operating at 104°F/ 40° C)
Shock: In compliance with IAW DEF STAN 00-35 (pt 3) Ch 2-03 Para 5.2 (tbl 1)
Vibration: In compliance with IAW DEF STAN 00-35(pt 3) Ch 2-01 Sec 5.2 (Annex B)
Emissions: In compliance with FCC CFR47 Part 15.107, 15.109 & BS EN 55032:2015
Immunity: In compliance with BS EN 55024:2010
Safety: In compliance with BS EN 60950-1:2005/A2:2003, UL/IEC 60950-1 2nd Edition & CAN CSA C22.2 No. 60950-1-07

Dimensions

1.69 x 8.19 x 6.77in (HxWxD)
(43 x 208 x 172mm)

Weight

1.9lbs (0.9kg)