Skip to main menu Skip to main content Skip to footer

WBS-670 (DISCONTINUED)

Details

  • UHF band, single-channel wireless base station
  • UHF band: operate in select frequency bands between 518-686MHz
  • Single-channel
  • Two separate channels for 2-wire or 4-wire connectivity
  • Supports up to four full-duplex wireless beltpacks
  • Standalone wireless communication system or combined with wired intercoms
  • Full talk/listen headset at the base
  • Rear panel connections allow system expansion
  • Input and output level adjustment controls
  • Stage Announce (SA) button

Item Code

WBS-680/E88 (not all frequency bands are available in all countries)

Technical
Specifications

BASE STATION

RF Frequency Range: 590-608MHz

Power Requirement: 100-240V AC, 50-60Hz, IEC receptacle

Typical Battery Life Alkaline: N/A

Typical Battery Life - Nickel Metal Hydride (1500 mAh): N/A

Current Draw: N/A

Temperature Range: -4oF to 140oF (20oC to 55oC)

Dimensions: 19.0 x 1.72 x 14.0in (WxHxD)

(48.3 x 4.4 x 35.6cm)

Weight: 6lbs. 15oz. (3.15kg)

Transmit Antenna: 1/2 Wave (supplied), TNC Male Connector

Receiver Antenna: 1/2 Wave (supplied), TNC Male Connector

FCC ID: B5DM514

Frequency Response: 300 - 8,000Hz

Four-Wire Input: Level Adjustable (2 Vrms typical)

Four-Wire Output: Level Adjustable (2 Vrms typical)

Clear-Com® Partyline Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 200 W

RTS® Partyline Levels: Input/Output Level Adjustable (0.775 Vrms typical), Line Impedance 200 W

Telex® Partyline Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 300 W

Auxiliary Input: Adjustable (2 Vrms typical)

Auliliary Output: Adjustable (2 Vrms typical into 600 W) (at rated deviation)

TRANSMITTER

Type: Synthesized, 720 channels

Transmit Power: 50 mW max. (High), 5 mW (normal)

RF Frequency Stability: 0.005%

Modulation: FM, 40kHz Deviation

Modulation Limiter: Peak-Responding Compressor

Modulation Frequency Range: 300 -8,000Hz +-2dB

Microphone Audio Input: 30 - 3,500W

Microphone Input Sensitivity: 9mV

Radiated Harmonics & Spurious: Exceeds FCC specifications

FCC Acceptance: Type accepted under FCC Part 74

 
RECEIVER

Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels

RF Sensitivity: <0.7mV for 12dB SINAD

Signal-to-Noise Ratio: 95dB

IF Selectivity: 3dB at 230kHz

Image Rejection: 70dB or better

Squelch Quieting: 95dB

RF Frequency Stability: 0.005%

Distortion: <1% at full deviation

Local Headset Output: 40mW output into 600 W (1% distortion)

FCC Acceptance: Notification under FCC Part 15

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent