Home chevron_right Products chevron_right MUX-22 Series (DISCONTINUED)

MUX-22 Series (DISCONTINUED)

The MUX-22 Series is a group of fiber interfaces that distribute multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The panels have 8 SD/HD/3G-SDi coaxial video inputs or outputs, a Coarse Wavelength Division Multiplexing (CWDM) module, and 4 video inputs, 4 video outputs and 4 4-wire RJ45 matrix ports.

Details

Seamlessly transports, routes and distributes audio, video, intercom and control data over one fiber optic cable
Full integration into SANE, DiViNe and Optocore network
SD/HD/3G-SDI capacity
- 8 SD/HD/3G-SDI ports
- 4 simplex LC fiber ports
CWDM (Coarse Wavelength Division Multiplexing) module
Tri/Bi-level video clock input and output module
Optocore module
- 2 x Optocore 2Gbps ports
- 2 x SANE/LAN ports
- 2 x LAN ports
- 4 x RS485/422 ports
- Word Clock I/O
Redundant power supplies
Full control with ProGrid control software
LAN, USB and RS232 ports for configuration

Item Code

MUX-22-CC

MUX-22-CC-2IN-6OUT

MUX-22-CC-6IN-2OUT

MUX-22-CC-8IN

MUX-22-CC-8OUT

MUX-22-MADI-BNC

MUX-22-MADI-BNC-8IN

MUX-22-MADI-BNC-8OUT

MUX-22-MADI-OPT

MUX-22-MADI-OPT-8IN

MUX-22-MADI-OPT-8OUT

MUX-22-RTS

MUX-22-RTS-8IN

MUX-22-RTS-8OUT

Technical
Specifications

Intercom Ports

Connector: 4-wire Clear-Com standard; 4 x input, 4 x output RJ45, Clear-Com convention

Optical Link

Connection: Duplex LC

Protocol: Optocore

Transmission: Full Duplex

Fiber Cable Lengths: Standard singlemode transceiver <10 km; Special singlemode transceiver < 80 km (on request)

SANE, LAN ports

Auxiliary Ports Convention EIA / TIA-485

Data channels: Digital control data; 4

Data rate: Up to 10 Mbps

Impedance: Termination; 330 O; Source; = 10 O

Video

Standards: SD, ED, HD, Dual Link, 3G

Complies with SMPTE: 259M, 292M, 344M, 372M, 424M

Interface: SDI – Serial Digital Interface

Word Clock

Hardware standard BNC – 75 O

Data Rate: Dependent on sample rate; Up to 192kHz

Impedance: Output = 5 O; Input 75 O

Drive Level: Output; = 1 Vpp

Zero Level: Referring to GND; +1.7 V

Sense Level: Input; = 400 mVpp

Optical Connection

Complies with 21 CFR 1040.10 and 1040.11

Remote Control

RS232: EIA / TIA – 232; 57 600 Baud

USB: USB 2.0 – Device; 12 Mbit/s

LAN: IEEE – 802.3; 10/100 Mbit/s

Power Supply

Type: Switch-mode, universal input

Main Voltage: 100-240V; 50-60Hz

Frequency: 50-60 Hz

Cooling: Passive, via surface and ventilation openings on both sides of the device

Dimensions

19 x 1.73 x 7.87in (WxHxD)

(483 x 43.94 x 199.9mm)

Weight

6.6lbs (3.0kg)

Resources

View All

trending_flat

BroaMan MUX-22-CC Quick Start Guide

2014-01

trending_flat

MUX-22 Series Datasheet

2017-08

2020-03

Associated
Products

Route66 Series (DISCONTINUED)

The Route66 Series are fiber interfaces that routes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The 2RU interface has a 40x40 optical MUX and router for up to 24 BNC-SDI 3G/HD/SD video ports, up to 20 duplex or 36 simplex protocol-independent LC fiber ports. The Route66 also features a VSync board with selectable synchronization formats from Word, BB and Tri-level.