Home chevron_right Products chevron_right Route66 Series (DISCONTINUED)

Route66 Series (DISCONTINUED)

The Route66 Series are fiber interfaces that routes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The 2RU interface has a 40x40 optical MUX and router for up to 24 BNC-SDI 3G/HD/SD video ports, up to 20 duplex or 36 simplex protocol-independent LC fiber ports. The Route66 also features a VSync board with selectable synchronization formats from Word, BB and Tri-level.

Details

Uses CWDM or DWDM to single-fiber I/O ports
Up to 24 BNC-SDI ports for 3G/HD/SD video input or output with or without reclockers
Up to 20 additional general protocol-independent duplex LC fiber ports
Up to 36 general protocol-independent simplex LC fiber ports
Protocol Independence for routing 1G Ethernet, SMPTE311m camera feeds, intercom, MADI, Optocore signals and 3rd-party digital audio at the same time on the same device
Compatible with BroaMan devices for distributed transport solutions
Optional Route66 will automatically patch assigned channels to 5, 10, or 20 satellite stageboxes

Item Code

Route66-AUTO-5

Route66-AUTO-10

Route66-AUTO-15

Route66-AUTO-20

Technical
Specifications

Optical Link

Connection: Duplex LC

Protocol: Independent (no restriction)

Transmission: Full Duplex

Fiber Cable Lengths: Standard single mode transceiver =10 km; Special single mode transceiver = 80 km (on request)

SANE, LAN Ports

Audio: TIA – 568A/B, Optocore; 200 Mbit/s

LAN: TIA – 568A/B, IEEE - 802.3; 10/100 Mbit/s

Auxiliary Ports

Fiber Duplex LC 1310nm fiber tunnel Protocol: Independent (no restrictions)

Data Port

Data Channels: Digital control data; 4

Data Rate: Up to 10 Mbps

Impedance

Termination: 330 O

Source: = 10 O

Video

Standards: SD, ED, HD, Dual Link, 3G

Complies with SMPTE: 259M, 292M, 344M, 372M, 424M

Interface: SDI – Serial Digital Interface

Word Clock

Hardware Standard: BNC – 75 O

Data Rate: Dependent on sample rate; Up to 192 kHz

Impedance: Output = 5, O Input 75 O

Drive Level: Output; = 1 Vpp

Zero Level: Referring to GND; +1.7 V

Sense Level: Input; = 400 mVpp

Optical Connection

Complies with 21 CFR 1040.10 and 1040.11

Remote Control

RS232: EIA / TIA – 232; 57 600 Baud

USB: USB 2.0 – Device; 12 Mbit/s

LAN: IEEE – 802.3; 10/100 Mbit/s

Power Supply

Type: Switch-mode, universal input

Main Voltage: 100-240V; 50-60Hz

Frequency: 50-60Hz

Cooling: Passive, via surface and ventilation openings on both sides of the device

Dual Redundancy

Dimensions

3.46 x 19 x 7.87in (HxWxD)

(88 x 483 x 200mm)

Weight

Dependent on configuration

Resources

View All

trending_flat

Route66 Series Datasheet

2017-08

2020-03

Associated
Products

MUX-22 Series (DISCONTINUED)

The MUX-22 Series is a group of fiber interfaces that distribute multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The panels have 8 SD/HD/3G-SDi coaxial video inputs or outputs, a Coarse Wavelength Division Multiplexing (CWDM) module, and 4 video inputs, 4 video outputs and 4 4-wire RJ45 matrix ports.