Skip to main menu Skip to main content Skip to footer
Home chevron_right Products chevron_right FSII-BP19

FSII-BP19

The FSII-BP19 is a rugged, water-resistant beltpack that operates in the ISM license-free 1.9 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP19 has high audio bandwidth for superior intelligibility and listening comfort.

FreeSpeak II® 1.9 beltpacks with firmware version 5.3.32.0 upwards support Bluetooth® headsets.

Details

Beltpack

  • Functions with FreeSpeak BASE-II, FreeSpeak Edge Base, Arcadia Central Station and Eclipse HX via E-IPA cards
  • 1.9, 2.4 and 5.0 GHz beltpacks operate on a single system
  • Supports up to 200 beltpacks on a single system (see Capacity Chart for details)
  • Encoder Volume Swap between A&C and B&D
  • “Listen Again” message replay
  • Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
  • Over-the-air beltpack registration

Connectivity

  • 1.9 GHz radio frequency
  • Typical range 300ft (90m), outdoor range 800ft (240m)
  • Robust radio link works in high multipath or reflective environments
  • FSII 1.9 beltpacks supports Bluetooth headset connection up to version 5.1

Mechanical

  • IP53 rating for wet and dusty conditions
  • 18+ hour battery life or USB port for continuous operation

Compatible Headsets and Mics

Item Code

Approved for use in USA, Mexico & Canada:
FSII-BP19-X4-US
FSII-BP19-X5-US
FSII-BP19-X7-US

Approved for use in EU:
FSII-BP19-X4-EU
FSII-BP19-X5-EU
FSII-BP19-X7-EU

Approved for use in Brazil:
FSII-BP19-X4-B
FSII-BP19-X5-B
FSII-BP-19-X7-B

Approved for use in Latin America & Argentina:
FSII-BP19-X4-LA
FSII-BP19-X5-LA
FSII-BP-19-X7-LA

Approved for Japan
FSII-BP19-X4-J
FSII-BP19-X5-J
FSII-BP19-X7-J

Technical
Specifications

Audio

Audio Bandwidth: 200Hz-7.5KHz

No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume

Mode of Operation: Full duplex on all routes

Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls

Enter/Answer-Back Button: 1

Bluetooth 4.3 Headset Profile
Codec: MSBC using HFP (Hands Free Profile)

Frequency Spectrum

USA, Canada, Mexico: 1920-1930 MHz
Transceiver Range Output Power: 100mW

EU, Russia, Ukraine, Singapore, Hong Kong, Australia, New Zealand,
South Africa: 1880-1900 MHz
Transceiver Range Output Power: 250mW

Japan: 1893-1906 MHz
Transceiver Range Output Power: 250mW

Argentina: 1910 MHz-1930 MHz
Transceiver Range Output Power: 250mW

Brazil: 1910 MHz-1920 MHz
Transceiver Range Output Power: 250mW

Chile: 1910 MHz-1930 MHz
Transceiver Range Output Power: 70mW

Taiwan: 1880-1895 MHz
Transceiver Range Output Power: 250mW

Connectors

Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT

Headset Voltage: Maximum of ~+8dBu as set by firmware

Microphone Type: Electret and Dynamic, selectable in beltpack menu

Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).

Dynamic Mic: -55dBu

Headset Limiter: Selectable from beltpack menu

 
Power

Modulation: GFSK, TDMA frame 10ms Full and Long slot

Output Power: (EU/Russia) 10dBm average, (US) 18-20dBm

Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)

Battery: Li-Ion or 3 AA alkaline cells

Battery Charging: Drop-in charger (AC60) or local USB

Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells

 
Environmental

IP53 water and dust resistance

Operating: 32º-125ºF (0º-50ºC)

Storage: 32º-150ºF (0º-70ºC)

Humidity: Between 20% and 90%, Non-Condensing

 
Dimensions

Tapered design at largest points

3.75 x 5 x 1.5in (HxWxD)

(97 x 130 x 45mm)

 
Weight

9.0oz (0.4kg) including batteries

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent