Skip to main menu Skip to main content Skip to footer

FSII-BP24-O2

The FSII O2 2.4 GHz beltpack is specifically designed to work in Hyperbaric chambers safely, operating at atmospheric pressures of 5.1 atm, 517 kPa, or 75 psi with a change of +/- 26 psi per minute without damage.

Details

  • Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
  • Designed to work at atmospheric pressure up to 75 psi
  • Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240 m)
  • 1.9 and 2.4 GHz beltpacks operate on a single system
  • Up to 65 - 90 beltpacks on a single system
  • "Listen Again" message replay
  • Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
  • Over-the-air beltpack registration
  • XLR-4M headset connector
  • IP53 rating for wet and dusty conditions
  • Built-in flashlight
  • Uses AA alkaline or rechargeable Nickel Metal Hydride batteries

Item Code

FSII-BP24-X4-O2-US: for high pressure environments XLR-4M headset connector for use in USA; Canada; Mexico

FSII-BP24-X4-O2-EU: XLR-7M headset connector for use in EU countries only

Technical
Specifications

Audio

Audio Bandwidth: 200Hz-7.5KHz

No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume

Mode of Operation: Full duplex on all routes

Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls

Enter/Answer-Back Button: 1

 
Radio

Frequency Spectrum: 2.400-2.483MHz for EU and US cellular auto roaming technology

Modulation: GFSK, TDMA frame 10ms full slot

Output power: (EU) 18dBm, (RoW) 22dBm

Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)

Battery: 3 AA alkaline or Nickel Metal Hydride

Battery Life: 9+ hours

Headset Connector: 4-pin male

Microphone Type: Electret and Dynamic, selectable in beltpack menu

Headset Limiter: Selectable from beltpack menu

Environmental

IP53 water and dust resistance

Operating: 32º-125ºF (0º-50ºC)

Storage: 32º-150ºF (0º-70ºC)

Humidity: Between 20% and 90%, Non-Condensing Atmospheric pressures of 5.1 atm or 75 psi

 
Dimensions

Tapered design at largest points

3.75 x 5 x 1.5in (HxWxD)

(97 x 130 x 45mm)

 
Weight

9.0 oz (0.25 kg) including batteries

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent