Connectors
Headset: 4-pin XLR-M (X4), 5-pin XLR-F (X5), 7-pin XLR-M (X7 – 2 PTT Parallel with GPI 1-2)
Gooseneck Mic: 3-pin Tuchel
Auxiliary Audio: (2) RJ45 (External I/O 1 & 2) AES-72 Type 3M Pinout - 1: In, 2: Out
GPIO: (1) DB9F (2 GPI, 2 GPO)
USB: Type A, C
Analog: (1) RJ45 for Eclipse MVX*
LAN: (2) RJ45
DC Power Connector: KPJX-4S-S
Controls and Indicators
Front Panel
(1) Mic mute Button
(1) Headset/Gooseneck Mic Input Select Button
(1) Touchscreen Button
(1) Main Level Control
(1) Aux Level Control
Rear Panel
(2) LAN RJ45 Link/Activity LEDs
Microphone
Input Type: Dynamic/Electret – Selectable
Microphone Voltage: 5V
Frequency Response: 200Hz to 20kHz ±3dB relative to 1kHz
Impedance (Electret): 1700 Ω +/- 10%
Impedance (Dynamic): 1000 Ω +/- 10%
Headset
Earphone Impedance: >= 32Ω
Output: 75mW into 50Ω @ <1% THD
Loudspeaker
Frequency Response: 200Hz-10kHz +/- 3dB
4-Wire Aux Line Level Interfaces
Electrically balanced input and output
Input:
Nominal Level: 0dBu
Maximum Level: +18dBu
Frequency Response: 30Hz to 22kHz ±3dB
Noise: <-70 dBu RMS THD: <0.1% @ 1kHz and <0.5% across specified bandwidth
Impedance: >50KΩ
Output:
Nominal Level: 0dBu
Maximum Level: +18dBu
Frequency Response: 30Hz to 22kHz ±3dB
Noise: <-70 dBu RMS
THD: <0.1% @ 1kHz and <0.5% across specified bandwidth
Impedance: <60Ω
Logic Power Output
To power Logic Inputs
Output: 5V, separate pin
Current (Max): 0.5A
Power Logic Inputs – GPI
See Host System for configuration options
Number of Inputs: 2
Style: Opto-Isolated
Input Voltage Range: 0 - 30V DC or AC
Input Current: >=10mA required
Power Logic Inputs – PTT (-X7 Variant)
See Host System for configuration options
Number of Inputs: 2
Style: Current-Sink
Input Voltage Active: ≤1.0V DC
Input Voltage Inactive: ≥2.0 V DC
Input Voltage (Max): +60 V
Logic Outputs – GPO/Relay
See Host System for configuration options
Number of Outputs: 2
Style: Solid State Relay
Normalized: Open or Closed, separate pins
Switching Voltage (Max): 60V DC
Switching Current (Max): 250mA
Power Delivery
Charging or powering a 3rd-party device when panel is locally powered
USB-A: 2.5W @ 5V DC
USB-C: 15W @ 5V DC, 27W @ 9V DC**
Power
DC Power Input:
Voltage: 12V DC ± 5%
Current (Max): 5A
Power (Max): 60W
BTU (Max): <43 BTU/hr
Input Power Connector: KPJX-4S-S
This unit is powered via DC input using:
AC Adapter - Inline:
Type: PSU-00010 (optional)
Input Voltage Range: 100 - 240V AC
Input Frequency Range: 50 - 60Hz
Input Power Connector: IEC-C14
Output Voltage: 12V DC ± 5%
Output Current (Max): 5A
Output Power (Max): 60W
Output Power Connector: KPPX-4-P
Ground: Protective earth connected to DC return (non-isolated)
PoE+ - Power over Ethernet
IEEE 802.3at - Class 4
PSE: 30.0W DC max @ Power Source Req.
PD: 25.5W DC max @ Powered Device Draw
Environmental
Operating: 32° to 113°F (0° to 45°C)
Storage: -22° to 158°F (-30° to 70°C)
Humidity: 20-90% Non-Condensing
Dimensions
1RU
19 x 1.7 x 13.9in (WxHxD)
(482.6 x 43.2 x 353.1mm)
Weight
~5.5 lbs (~2.5 kg)