Skip to main menu Skip to main content Skip to footer

Route66 Series (DISCONTINUED)

The Route66 Series are fiber interfaces that routes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The 2RU interface has a 40x40 optical MUX and router for up to 24 BNC-SDI 3G/HD/SD video ports, up to 20 duplex or 36 simplex protocol-independent LC fiber ports. The Route66 also features a VSync board with selectable synchronization formats from Word, BB and Tri-level.


  • Uses CWDM or DWDM to single-fiber I/O ports
  • Up to 24 BNC-SDI ports for 3G/HD/SD video input or output with or without reclockers
  • Up to 20 additional general protocol-independent duplex LC fiber ports
  • Up to 36 general protocol-independent simplex LC fiber ports
  • Protocol Independence for routing 1G Ethernet, SMPTE311m camera feeds, intercom, MADI, Optocore signals and 3rd-party digital audio at the same time on the same device
  • Compatible with BroaMan devices for distributed transport solutions
  • Optional Route66 will automatically patch assigned channels to 5, 10, or 20 satellite stageboxes

Item Code






Optical Link

Connection: Duplex LC

Protocol: Independent (no restriction)

Transmission: Full Duplex

Fiber Cable Lengths: Standard single mode transceiver =10 km; Special single mode transceiver = 80 km (on request)


Audio: TIA – 568A/B, Optocore; 200 Mbit/s

LAN: TIA – 568A/B, IEEE - 802.3; 10/100 Mbit/s

Auxiliary Ports
Fiber Duplex LC 1310nm fiber tunnel Protocol: Independent (no restrictions)
Data Port

Data Channels: Digital control data; 4

Data Rate: Up to 10 Mbps


Termination: 330 O

Source: = 10 O


Standards: SD, ED, HD, Dual Link, 3G

Complies with SMPTE: 259M, 292M, 344M, 372M, 424M

Interface: SDI – Serial Digital Interface

Word Clock

Hardware Standard: BNC – 75 O

Data Rate: Dependent on sample rate; Up to 192 kHz

Impedance: Output = 5, O Input 75 O

Drive Level: Output; = 1 Vpp

Zero Level: Referring to GND; +1.7 V

Sense Level: Input; = 400 mVpp

Optical Connection
Complies with 21 CFR 1040.10 and 1040.11
Remote Control

RS232: EIA / TIA – 232; 57 600 Baud

USB: USB 2.0 – Device; 12 Mbit/s

LAN: IEEE – 802.3; 10/100 Mbit/s

Power Supply

Type: Switch-mode, universal input

Main Voltage: 100-240V; 50-60Hz

Frequency: 50-60Hz

Cooling: Passive, via surface and ventilation openings on both sides of the device

Dual Redundancy


3.46 x 19 x 7.87in (HxWxD)

(88 x 483 x 200mm)

Dependent on configuration

Ready to get

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent