Driver: 40mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
Frequency Response: 40Hz – 20kHz
Polar Pattern: Hyper-cardioid
Frequency Response: 300Hz – 20kHz
Open Circuit Sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical
102 dB ±3 dB; at 1kHz typical
400 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
Cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
Packaging for CC-300:
4.8 x 13 x 10.43 in (WxHxD)
(122 x 330 x 265 mm)
8.6oz (245g) without 8-pin cable assembly and M3*18mm SCREW
This single-ear headphone delivers high quality audio experience through its dynamic cardioid microphone and 300Hz-20kHz frequency response. The closed-back headphone has a frequency response of 40Hz – 20kHz.
The CC-300 headset microphone can be rotated 300-degrees. Microphone can be turned on or off by simply shifting the microphone boom up/down, while keeping the intercom on. Pull up the boom to turn off the mic, and pull down the boom to turn it on.
The CC-300 headset can be easily adjusted to accommodate the preference of any user. Because the boom has a 300° rotation, it to allows the microphone to be worn on the left or right side of the head. Users can make the headset larger or smaller by using the slide adjusts on either side of the headband. Cushioned with soft leatherette padding, the headphone sits around the ear to provide a comfortable fit for users.
The CC-300 is designed to be rugged for withstanding harsh usage. However, wear and tear from frequency usage and harsh treatments over a long period may damage certain parts. With the CC-300, all component parts are fully serviceable in the field with a standard Phillips screwdriver.