Frequency Range: All (2400 – 2483.5 MHz)
Low (2401.92 to 2439.936 MHz)
High Band (2443.392 to 2481.408 MHz)
Frequency Response: 200 Hz to 3.5 kHz
Security: 64-Bit Encryption
Temperature Range: 4 to131°F (-20 to 55°C) Typ.
Transmit/Receive : Frequency-Hopping, Spread Spectrum (FHSS)
Transmit Power : 100mw Burst
Modulation Type : Gaussian Filtered FSK, TDMA
Frequency Stability : 13 ppm
Harmonics/Spurious : Exceeds FCC and ETSI Specifications Over Temperature
RF Sensitivity: <-90dBm w 10-3 BER
System Distortion: <2%
Dynamic Range: -90dBm to –20dBm;
FCC License: None Required (Approved for Worldwide Use)
FCC Acceptance : Part 15
Antenna Type: External, Dual Diversity ½-Wave Dipole, R-TNC Connector (x2)
Power Requirements : 100–240VAC, 50-60Hz or 12-14VDC or Six 1.5V AA Batteries or
BAT850 Rechargeable Battery (Optional)
Size : 8” x 8” x 3.5” (20.32cm x 20.32cm x 8.89cm)
Weight : 2.75 lb. (1.25kg) with Battery
AUX I/O : 600 Ω Balanced, with Level Adjustment
Headset Connector (x2) : Mini-DIN
Headset Output: 200mW into 32W
Relay: 8-Pin Phoenix – NC,COM,NO,GND (x2)
2A @ 30VDC
The European Telecommunications Standards Institute (ETSI) has mandated a change in the way wireless products operate in the 2.4GHz bands. This new directive, EN 300 328 v1.8.1, requires Clear-Com to modify its DX-Series wireless intercom products and ship only v1.8.1 compliant products into countries that require CE compliance, beginning January 1, 2015.
What is EN 300 328 v1.8.1?
A new ETSI standard to address interference issues within the 2.4GHz ISM band.
The main changes relate to how devices communicate and allocate radio space when they are in the same area. A new “adaptive mode” is required, which provides a mechanism so equipment can adapt to its environment by identifying other transmissions present in the 2.4GHz band.
How will this affect Clear-Com DX-Series products?
Clear-Com has modified its DX-Series wireless intercom products to be v1.8.1 compliant and created new model numbers for products sold in EU countries.
How do I determine if my BP200, BP 210, WH200, WH220 will work with new EU compliant base stations?
Check the G number, which is located on label under the battery, and cross reference to chart above.
Characteristics of new v1.8.1 compliant product:
Triple diversity design transmits the audio signal twice, at different times and frequencies, and selects the strongest signal from two different antennas.
Multiple MB300 Base Stations can be connection together over the MB300ES-RJ45 connector cable. MB300ES-RJ45 provides up to 7-foot of connectivity between base stations.
Auxiliary Input and Output ten-pin terminal strip connector makes it easy for connecting to four-wire intercom systems. External interface required to connect into 2-wire systems.
Highly portable and very quick to set up and operate.
Easily configured to operate with almost any base radio or 4-wire intercom.