FreeSpeak Edge® Transceiver
Transceiver
Connectivity
Mechanical
FSE-TCVR-50-IP-US, FSE-TCVR-50-IP-EU, FSE-TCVR-50-IP-J, FSE-TCVR-50-IP-CA, FSE-TCVR-50-IP-KA, FSE-TCVR-50-IP-AZ, SFP-SMFO-1G-SX (Single Mode), SFP-MMFO-1G-LX (Multi-Mode)
The FSE-TCVR-50-IP is an active IP transceiver antenna for the FreeSpeak Edge wireless system. The transceiver delivers duplex communications from the Eclipse® HX matrix system via the E -IPA-HX interface card to the FreeSpeak Edge beltpacks. Each transceiver can support up to ten FSE-BP50 beltpacks. When supported with an E-IPA-HX card with 64 licensed ports, up to 64 FreeSpeak Edge beltpacks and 64 transceivers can be deployed with one Eclipse HX matrix system.
The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.
Frequency Spectrum: 5170 -5875MHz (20MHz channels set by country)
Output Power: Adjustable from 1 – 24dBm (Maximum output power is determined by selected channel and country)
Modulation: OFDM
Antennas: 3dB Omni
Antenna Connector: RP-TNC
Input Voltage: 100 to 240V AC (50 – 60Hz)
Output Voltage: 12V @ 5A (60W)
MTBF (min.): 300,000 Hours (Calculated Hours at 25ºC by Telcordia SR-332)
IP53 water and dust resistance
Operating: 32° to 113°F (0° to 45°C)
Storage: 86° to 158°F (30° to 70°C)
Humidity: 20-90% Non-Condensing
With Transceiver Mount Bracket: 7.60 x 8.25 x 4.12in (WxHxD)
(193.04 x 209.6 x 104.65mm)
Without Transceiver Mount Bracket: 7.60 x 8.25 x 3.37in (WxHxD)
(193.04 x 209.6 x 85.6mm)
Transceiver Mount Bracket: 4.26 x 4.51 x 0.75in (WxHxD)
(108.27 x 114.62 x 19.05mm)
Distance Between Vertical Screw Holes: 3.5in (88.9mm)
Distance Between Horizontal Screw Holes: 3in (76.2mm)
With Transceiver Mount Bracket: 2.527lbs (1.15kg)
Without Transceiver Mount Bracket: 2.252lbs (1.02kg)
